Address: No. 3, Fuye Street, Jiangmen, Guangdong
Tel：0750-3809010 / 3809017
E-mail：info@mfbshk.com / mfbs@mfbshk.com
Hot melt adhesive is the abbreviation of hot melt adhesive, which is an important category of adhesive industry. It has the characteristics of solid content, no solvent, environmental protection, non-toxic and rapid curing. It usually refers to the adhesive that presents solid state at room temperature, melts into a viscous liquid when heated to a certain temperature, and completes bonding in a few seconds after coating and wetting the adhesive, pressing and cooling to room temperature. Therefore, it is widely used in medical protection products, sanitary products, automatic packaging, tape labels, electronic appliances, automotive interior decoration and other industries.
1. Bonding of nose beam of respirator
There are many kinds of masks, but they all have a nose strip, which is used to fix the mask on the nose bridge to effectively isolate viruses and ensure smooth breath. Most of the nose bridge strips are thin aluminum strips with certain strength, but they are also easy to bend, which is convenient for wearing masks. The fixation of the nose bar is mostly made of hot melt adhesive, which is first compounded on the nose bar and then hot pressed and pasted on the production line.
2. Composite of disposable protective clothing materials
Hot melt adhesive is used on the composite of PE breathable film and water repellent non-woven fabric, and the bonding strength is required to reach the effect of material breaking on both sides. Hot melt adhesive is commonly used as SBC type structural adhesive, and the coating weight is 1.8-4.0g/m2; Some medical protective clothing with higher requirements will use PUR hot melt adhesive.
3. Disposable protective mattress material composite
The composite of protective mattresses is similar to protective clothing. Hot melt adhesive is used for the composite of PE breathable film and water repellent non-woven fabric. The bonding strength is required to reach the effect that both sides are broken. Hot melt adhesive is commonly used as SBC type structural adhesive, and the coating weight is 1.8-4.0g/m2; This kind of hot melt adhesive product has the characteristics of environmental protection, non-toxic, fast adhesion, strong adhesion, etc.
Jiangmen M.F.B.S. Machinery Co., Ltd. specializes in R&D, production and sales of heat sealing tape, hot melt adhesive film and seamless fitting materials for medical protective clothing, outdoor sports clothing, footwear, casual wear, yoga clothing, luggage and other industries. Hot melt adhesive film manufacturers look forward to cooperating with you!
(Some materials of this website are from the network. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)
Address: No. 3, Fuye Street, Jiangmen, Guangdong
Tel：0750-3809010 / 3809017
E-mail：info@mfbshk.com / mfbs@mfbshk.com
WeChat Online Service
Online Service
better and cheaper
Seamless fit material
