Address: No. 3, Fuye Street, Jiangmen, Guangdong
Tel：0750-3809010 / 3809017
E-mail：info@mfbshk.com / mfbs@mfbshk.com
Decorative film performance:
1. Thermal insulation performance: the use of advanced technology to control the thermal insulation rate of products can be quantified, the thermal insulation rate can reach 79%, the room after the decorative film is reduced by more than 3-6 degrees in summer than the room temperature without decorative film (depending on the size of the window area and orientation) to effectively control sunlight and exposure, reduce the cost of air conditioning. Healthy and comfortable. Curtains, umbrellas, awnings: The insulation rate of traditional shading products cannot be quantified, and many times it is shading and cannot be insulated.
2. Warmth: This series of decorative film can play a role in thermal insulation in winter, through the vacuum magnetron sputtering coating, the indoor heat source (far infrared) can be reflected back to the room, thus playing a role in heat preservation.
3. UV insulation: Because the ultraviolet absorber is injected in the film layer, 99% of the ultraviolet rays can be isolated, the skin is protected from harm, and the furniture, floor, and fabric do not fade.
1. Check whether the construction site is suitable for construction. The measured area shall be true and accurate to cm. Determine the model of decorative film required by customers, and perform fine film cutting.
2. Treatment on the construction site: the work clothes shall be clean and tidy, and the shoes shall be put on before entering the room to check whether the glass and other items are in good condition.
3. On site protection: handling, protection, displacement of customers' goods, and taking photos before film application, so as to facilitate the return after construction.
4. Dedusting: generally, water mist falling dedusting is adopted (the kettle is adjusted to fog shape and sprayed to the ground in front of the film room or film window) to reduce the impact of dust on the film.
5. Glass cleaning: check whether the glass window is intact, cracked, missing, raised, sunken, scratched and firm, and handle accordingly.
6. Recheck whether the glass bead and glass glue are intact, whether they fall off, and whether the quality affects the film pasting, and handle them accordingly.
(Part of the materials on this website are from the network. If the information displayed on this website infringes the intellectual property rights or other legitimate rights and interests of the media or individuals, please notify us in time and we will delete it immediately.)
Address: No. 3, Fuye Street, Jiangmen, Guangdong
Tel：0750-3809010 / 3809017
E-mail：info@mfbshk.com / mfbs@mfbshk.com
WeChat Online Service
Online Service
better and cheaper
Seamless fit material
